DarkCubic » 1/8

Little Buster! – Sasasegawa Sasami 1/8 PVC by Alter

erkeni — Tue, 25 May 2010 22:23:43 +0000

Newest upcoming release by Alter, Sasasegawa Sasami (笹瀬川佐々美) from Little Buster! (リトルバスターズ!) – manga / game which was developed by the famous studio, Key. Sculpted by 2 sculptor – Hiromitsu Morikawa and Noboru Aketagawa. Complete pre-painted PVC 1/8 scaled figure which will be release on coming September 2010 which is after the release of Amae Koromo and Akiyama Mio. Around 11cm height, not sure about the width though. Sasami eye is really look sharp, compare to other character which usually more rounded o_0..Retail price at 6,800yen, pre-order links below of this page – most of their price will be much lower than the retail price.

Summary

Release by
Alter

Producer
Hiromitsu Morikawa and Noboru Aketagawa

Model
Sasasegawa Sasami 1/8 PVC figure

Series
Little Buster!

Release in
September 2010

Height of figure
around 11cm

Price
6800yen, around 252USD, RM75

Via Alter
Direct link
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

Saki – Amae Koromo 1/8 PVC by Alter

erkeni — Tue, 25 May 2010 21:52:59 +0000

Amae Koromo by Alter..That’s good One of moe character in Saki -- a manga / anime series about mahjong if you don’t know. 1/8 scaled (23cm) tall which for sure included the height of her longggggg ribbon..lol..Sculpted by Akatsuki. Retail price tag, 6800yen and will be in stock on coming August 2010, which is the same month with Akiyama Mio by Alter. The cute facial expression and overall design of dress, hair, included the pocket watch make this little one attractive. See the preview and pre-order links below.

Summary

Release by
Alter

Producer
Akatsuki

Model
Amae Koromo 1/8 PVC figure

Series
Saki

Release in
August 2010

Height of figure
around 23cm

Price
6800yen, around 253USD, RM75

Via Alter
Direct link
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

K-On! – Akiyama Mio School Festival ver. 1/8 PVC by Alter

erkeni — Tue, 25 May 2010 20:53:24 +0000

Akiyama Mio from Alter ftw I place an order on one at HobbySearch, they had 20% off -- from 6,800yen to 5440yen. Since it will be the first Mio figure I get, Alter release will be my first choice Mio figure will stand 21cm height (1/8 scaled) included her instrument which stand a bit taller. Complete pre-painted PVC figure sculpted by Toshiaki Numakura which will be release on coming August 2010. The dress really suit her dont you think? See below for preview and pre-order links.

Summary

Release by
Alter

Producer
Toshiaki Numakura

Model
Akiyama Mio School Festival ver. 1/8 PVC figure

Series
K-On!

Release in
August 2010

Height of figure
around 21cm

Price
6800yen, around 253USD, RM75

Via Alter
Direct link
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

To Aru Kagaku no Railgun – Misaka Mikoto 1/8 PVC by Good Smile Company

erkeni — Sun, 23 May 2010 12:00:01 +0000

Late Saved Draft, Misaka Mikoto (みかさみこと) 1/8 scaled made up of PVC. From To Aru Kagaku no Railgun but she also did appear in Toaru Majutsu no Index. The figure will be 18cm height and release on coming July 2010. It seems a sword is provided along as a additional part ^^ Retail price 5,800yen, expect to be lower than this price when you buy it (of course it doesn’t include shipment fee). See the preview and pre-order link below.

Summary

Release by
Good Smile Company

Producer
Ken Yokota

Model
Misaka Mikoto 1/8 PVC figure

Series
To Aru Kagaku no Railgun

Release in
July 2010

Height of figure
around 18cm

Price
5800yen, around 62USD, RM200

From the popular anime currently being broadcast in Japan, “A Certain Scientific Railgun” comes a PVC figure of Misaka Mikoto wearing her school uniform. Misaka is one of the seven Level 5 espers in Academy City, and the only one who is an electromaster with command over electricity!

She has been posed in the classic pose she always takes just before shooting off her famous “railgun” attack – holding a coin in her one hand whilst staring ahead with an imposing, albeit rather attractive pose. The figure also comes with the popular “iron-sand sword” that appeared in the anime, which can be held in her other hand, allowing for a slightly different display option.

Good Smile Company website
Reserve it at HobbySearch | HobbyStock | AmiAmi | ToysLogic

Related Posts

Muramasa : The Demon Blade – Momohime 1/8 PVC by Alter

erkeni — Fri, 26 Mar 2010 13:05:40 +0000

Momohime from Muramasa : The Demon Blade (Oboromuramasa) the action role playing game for Wii. 1/8 scaled (21cm) complete pre-painted PVC figure and included with base too, though expect a bit different look base from the picture. Will be release on July 2010 same as Vivio with same retail price 7800yen. It seems the sword can be replace with optional part, see below picture.

Summary

Release by
Alter

Producer
Tokuho Fukumoto

Model
Momohime 1/8 PVC figure

Series
Muramasa : The Demon Blade

Release in
July 2010

Height of figure
around 21cm

Price
7800yen, around 83USD, RM277

Alter website
Direct page : here
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

Shining Wind – Clalaclan Philias Armor ver. 1/8 PVC by Alter

erkeni — Fri, 12 Mar 2010 12:14:02 +0000

o_O I was amazed by the details and color by looking from the top to bottom – hair, armor, weapon & others as you can see. Clalaclan Philias Armor ver. release by Alter. Oh yes, it’s Alter again and it will be 1/8 complete pre-painted PVC figure. Figure is sculpted by Toshiyuki Yagyu who sculpted the Saber Lily from Alter too. Expected to be release on July 2010, so pre-order it earlier or you might miss it The price? 9,800yen retail price, I provided some online store link below, compare the price if you wish to. See more photo preview below.

Summary

Release by
Alter

Producer
Toshiyuki Yagyu

Model
Clalaclan Philias Armor ver. 1/8 PVC figure

Series
Shining Wind

Release in
July 2010

Height of figure
around 21.5cm

Price
9800yen, around 108USD, RM357

Alter website
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

Strike Witches – Eila Ilmatar Juutilainen 1/8 PVC by Kotobukiya

erkeni — Fri, 12 Mar 2010 10:31:16 +0000

Gone for a week without updating…well next 2 week will be my exam week, what a pain. So here is a release by Kotobukiya, Eila Ilamatar Juutilainen (エイラ・イルマタル・ユーティライネン) from Strike Witches (ストライクウィッチーズ). 1/8 scaled (22cm height) complete pre-painted PVC figure. Eila is sculpted by Tone & she will be equipped along with her striker unit & MG42 machine gun. You can get her at the retail price of 6,800yen (which differ depends on seller) which expected to be release Jun 2010. Look up on the preview below.

Summary

Release by
Kotobukiya

Producer
Tone

Model
Eila Ilmatar Juutilainen 1/8 PVC figure

Series
Strike Witches

Release in
Jun 2010

Height of figure
around 22cm

Price
6800yen, around 75USD, RM248

Kotobukiya website
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

Tayutama – Kawai Ameri 1/8 PVC by Orchid Seed

erkeni — Wed, 03 Mar 2010 13:41:08 +0000

Seems I had random update here for filling what I miss, lol… Featuring Kawai Ameri (河合アメリ) from Tayumata, 1/8 scaled (11.5cm height) complete pre-painted PVC figure manufactured by Orchid Seed. Cute and sexy :p but don’t buy it if your parent won’t allow you to since you gonna display it out on the shelf…haha..Sculpted well by Minheru and this figure will be release on May 2010 at the retail price of 6,800yen. I think there will be some parts made up of ABS too. See photo preview below, skip this if you don’t feel like it.

Summary

Release by
Orchid Seed

Producer
Minheru

Model
Kawai Ameri 1/8 PVC figure

Series
Tayutama

Release in
May 2010

Height of figure
around 11.5cm

Price
6800yen, around 76USD, RM257

Orchid Seed website
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts

K-On! – Akiyama Mio 1/8 PVC by FREEing

erkeni — Wed, 03 Mar 2010 13:26:51 +0000

Moe Moe Kyun! pose by Akiyama Mio from K-On! :p This figure will be manufactured by FREEing which will be release on July 2010 at the retail price of 7800yen, you can get her by 5,880yen at AmiAmi if you pre-order it since it is 19% discount – not included shipment fee Mio will be 1/8 scaled (around 20cm) complete pre-painted PVC figure. Included base that’s for sure. Oh yes, Mio will be also in maid outfit~but where is nekomimi one? See photo preview below.

Summary

Release by
FREEing

Model
Akiyama Mio 1/8 PVC figure

Series
K-On!

Release in
July 2010

Height of figure
around 20cm

Price
7800yen, around 87USD, RM295

FREEing website
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts

Hyakka Ryoran – Senhime 1/8 PVC by Alter

erkeni — Fri, 26 Feb 2010 13:21:09 +0000

Continue for last week, another release by Alter, Senhime 1/8 scaled (20.5cm) complete pre-painted PVC figure from Hyakka Ryoran ( 百花繚乱 / Samurai Girls) – Hobby Japans magazine, will be sculpted by Tsuyoshi Takahashi. If you wish Hyakka Ryoran website, here. The release date for Senhime will be on June 2010 at the retail price of 7800yen. See below for image preview.

Summary

Release by
Alter

Producer
Tsuyoshi Takahashi

Model
Senhime 1/8 PVC figure

Series
Hyakka Ryoran

Release in
June 2010

Height of figure
around 20.5cm

Price
7800yen, around 87USD, RM297

Alter website
Direct page : here
Reserve it at HobbySearch | HobbyStock | AmiAmi | ToysLogic

Related Posts

Strike Witches – Sanya V. Litvyak 1/8 PVC by Alter

erkeni — Sat, 20 Feb 2010 17:14:55 +0000

Here is another Strike Witches, Sanya V. Litvyak which is by Alter, my favorite manufacture! must expect nothing less from fine and detailed figure. :p Alter will release it at coming Jun 2010 with retail price tag of 7800yen. 1/8 scaled (22cm) complete pre-painted pvc made mecha mesume figure which is sculpted by Houjun Otoyama. She is designed well to fit all the look inside the anime, along with the rocket launcher Fliegerhummer. See the preview below. I think this will be the second Strike Witches release by Alter, the first one is Yoshika Miyafuji which will be re-release by Alter at July 2010.

Summary

Release by
Alter

Producer
Houjun Otoyama

Model
Sanya V.Litvyak 1/8

Series
Strike Witches

Release in
Jun 2010

Height of figure
around 22cm

Price
7800yen, around 84USD, RM289

Alter website
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts

Strike Witches – Erica Hartmann 1/8 PVC by Kotobukiya

erkeni — Sat, 20 Feb 2010 16:03:31 +0000

I saw there were two Strike Witches figure upcoming release. o_0 So first one, Erica Hartmann by Kotobukiya, oh quite good, 1/8 scaled (19cm tall) and the base actually will make it higher little bit more up to 22cm. Hartmann will be included with her machine gun (MG42) and also the hat, see photo preview below. On how fine it is sculpted, find it out after you buy one but don’t expect too less from Kotobukiya..lol..Hartmann figure will be fully pre-painted and release on May 2010 at the retail price of 6,800yen. Up to the next Strike Witches by Alter.

Summary

Release by
Kotobukiya

Producer
Fuyune

Model
Erica Hartmann 1/8 PVC figure

Series
Strike Witches

Release in
May 2010

Height of figure
around 19cm / 22cm (with base)

Price
6800yen, around 74USD, RM252

Kotobukiya website
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts

Da Capo – Asakura Nemu 1/8 PVC by Circus (Good Smile Company)

erkeni — Thu, 11 Feb 2010 17:51:56 +0000

One more day for college, I will be on holiday for whole week since it will be Chinese New Year ^^ Here is the release by Circus(distributed by GSC manufacture), Asakura Nemu (あさくらねむ) 1/8 scaled (20cm) PVC figure which included with trading card game “Weiß Schwarz” premium rare card x4 when you purchase. Da Capo (D.C ～ダ・カーポ～ ) anime got few season anyway, kinda long and I didn’t watch it half way since it was a bit boring as it proceed. Nemu figure will be release on May 2010 at retail price 9240yen included tax – kinda expensive. Mostly I think because the school uniform can be remove, allow you to pose it into a sexy one. See more preview below.

Summary

Release by
Circus, Good Smile Company

Producer
Choushinsei * Hikari

Model
Asakura Neimu 1/8 PVC

Series
Da Capo

Release in
May 2010

Height of figure
around 20cm

Price
9240yen, around 102USD, RM352

A cute figure complete with an equally cute, limited edition Weiß Schwarz card!

From the popular school romance series that has had various games, animes and more created from it, “Da Capo”, comes a PVC figure of the lovable heroine, Neimu Asakura.

She has been placed in a vibrant pose with both hands outstreached to either side of her, she is holding onto her school bag and pouch in her left hand. Her blouse is also completely removeable, allowing her to be posed in a much more sexually appealing pose.

The figure also comes with a limited edition Weiß Schwarz card – “Nyamu-Senpai”, which can only be obtained from this figure! Each figure comes with four copies of the card.

Good Smile Company website
Direct Link here
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts

K-On! – Nakano Azusa 1/8 PVC by Alter

erkeni — Wed, 10 Feb 2010 18:06:30 +0000

OMG, Nakano Azusa from K-On 1/8 scaled PVC figure release by Alter! I like most of Alter figure, as they are well sculpted and detailed ^^ Probably I would pre-order one from XL-Shop, which is a local store here and mostly will cheaper than I purchase online using some shipment. Azusa will be 20cm high and retail priced at 6800yen, as well as complete pre-painted & quite finely sculpted – see the cloth crease and wrinkle. The important thing, the neko ear is included too which make her much cuter ^^ The release date won’t be long from now, June 2010 which will be my birthday month :p

Summary

Release by
Alter

Producer
Sen-u Tanaka

Model
Nakano Azusa 1/8 PVC

Series
K-On!

Release in
June 2010

Height of figure
around 20cm

Price
6800yen, around 75USD, RM258

Alter website
Reserve it at HobbySearch | HobbyStock | AmiAmi | Play-Asia

Related Posts

White Album – Four Leaves Morikawa Yuki 1/8 PVC by Kotobukiya

erkeni — Sat, 30 Jan 2010 12:36:32 +0000

Ngek ngek~ it is Saturday, free rest time :p Here is a release of figure on White Album, Morikawa Yuki by Kotobukiya. 1/8 scaled (around 19cm high), will be in complete pre-painted and it is from 4-Leaves product line. Retail price is 6800yen, well its depends on seller anyway, so look for the cheapest one and count for the shipment price too if you plan it to buy online. It will be release at May 2010 – if there is no delay..haha..Sometimes delay do occur too, that would be unlucky. See preview below and some link.

Summary

Release by
Kotobukiya

Producer
M.I.C

Model
4-Leaves Morikawa Yuki 1/8 PVC

Series
White Album

Release in
May 2010

Height of figure
around 19cm

Price
6800yen, around 75USD, RM256

Kotobukiya website
Reserve it at HobbySearch | HobbyStock | AmiAmi | ToysLogic

Related Posts

Martian Successor Nadesico – Four Leaves Hoshino Ruri -Frill Style- 1/8 PVC by Kotobukiya

erkeni — Wed, 27 Jan 2010 09:27:58 +0000

Not updated for few days since a bit work to do and need prepare for tomorow test >.> Continue to where I left, here is release by Kotobukiya, Four Leaves LG Hoshino Ruri Frill Style 1/8 PVC figure at June 2010. Ruri from the anime/manga Martian Successor Nadesico or known as Nadesico in short – a science fiction comedy if you don’t know. It seems some note stated that there is Blu-Ray and DVD reissue of Nadesico at 24 February. This figure will be 14cm high and sculpted by Yozo Ogawa. Retail price at 5500yen, see below for preview.

Summary

Release by
Kotobukiya

Producer
Yozo Ogawa

Model
Four Leaves Hoshino Ruri -Frill Style- 1/8 PVC

Series
Martian Successor Nadesico

Release in
Jun 2010

Height of figure
around 14cm

Price
5500yen, around 61USD, RM210

Kotobukiya website
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts

Shining Wind – Xecty Eve 1/8 PVC by Kotobukiya

erkeni — Sat, 16 Jan 2010 12:29:51 +0000

Oh yeah~ weekend reached, time to relax after college..zz…but soon assignment gonna piled up, even worse. Ok, Here is an release by Kotobukiya, Xecty Eve 1/8 PVC figure which is from Shining Wind (シャイニング・ウィンド) – a RPG for PS2. Complete pre-painted and has height around 20cm, though the scythe she holding is actually taller than the figure. This fine and pretty one is sculpted by Hirotoshi Nakamura which will be release at May 2010 at the price of 6800yen. See below for pre-order link and image preview.

Summary

Release by
Kotobukiya

Producer
Hirotoshi Nakamura

Model
Xecty Eve 1/8 PVC

Series
Shining Wind

Release in
May 2010

Height of figure
around 20cm

Price
6800yen, around 74USD, RM249

Kotobukiya website.
Reserve it at HobbySearch | HobbyStock | AmiAmi | ToysLogic

Related Posts

Touhou – Eirin Yagokoro 1/8 PVC by Griffon Enterprises

erkeni — Tue, 29 Dec 2009 05:45:49 +0000

Another Touhou figure by Griffon Enterprises, Eirin Yagokoro (やごころ　えいりん) 1/8 PVC, which the character is known as a pharmacist & with incredible age – much more older than Kagura. As usual, the figure is complete pre-painted and will be sculpted by Akio Akiyama too. Eirin will be release at April 2010 & priced at 6800yen which will be same as Kagura figure. See below for image some preview.

Summary

Release by
Griffon Enterprises

Producer
Akio Akiyama

Model
Eirin Yagokoro 1/8 PVC

Series
Touhou

Release in
April 2010

Height of figure
around 18.6cm

Price
6800yen, around 73USD, RM254

Short description of character
A pharmacist which can create all type of medicine

Griffon Enterprises website.
Reserve it at AmiAmi

Related Posts

Touhou – Kaguya Houraisan 1/8 PVC by Griffon Enterprises

erkeni — Tue, 29 Dec 2009 05:23:27 +0000

I will update a few for today since yesterday I encounter some problem with the web host. 2 Touhou figure by Griffon Enterprises. Start with Kaguya Houraisan (ほうらいさん　かぐや) which is 1/8 scaled and made up of PVC. Complete pre-painted and has height around 16.5cm which will be sculpted by Akio Akiyama. Kaguya is a character that had identified to be ageless but existed for thousand year 0.o The retail price of this figure will be 6800yen and will be release at April 2010. It seems some parts are provided & the hand is moveable too, see below for image preview.

Summary

Release by
Griffon Enterprises

Producer
Akio Akiyama

Model
Kaguya Houraisan 1/8 PVC

Series
Touhou

Release in
April 2010

Height of figure
around 16.5cm

Price
6800yen, around 73USD, RM254

Short description of character
A princess of the Lunarians, a race of people living on the Moon

Griffon Enterprises website.
Reserve it at AmiAmi

Related Posts

Black Rock Shooter Black Blade ver. 1/8 PVC by Good Smile Company

erkeni — Fri, 25 Dec 2009 07:36:45 +0000

This time gonna run through some release by Good Smile Company. On April 2010, they will release Black Rock Shooter Black Blade ver (ブラック★ロックシューター Black blade ver) which is sculpted by Akeji (緋路). She is a character originally illustrated by Huke. As usual again, it will be complete pre-painted, height around 23cm and the price set at 6,800yen. See below for more details I think this one will be on most of figure collector to buy list xD

Summary

Release by
Good Smile Company

Producer
Akeji

Model
Black Rock Shooter Black Blade ver. 1/8 PVC

Series
Black Rock Shooter

Release in
April 2010

Height of figure
around 23cm

Price
6800yen, around 74USD, RM254

The popular character illustrated by huke is back again, but this time she is wielding a ‘Black Blade’ instead of the previous ‘Rock Cannon’.

In even more contrast to the original figure, this new version has a much lighter feel to it -- as she can be seen removing her jacket with her free hand, as she stands on a much more compact base compared to before.

Enjoy a whole new side of BLACK ROCK SHOOTER.

Good Smile Company website.
Reserve it at HobbySearch | HobbyStock | AmiAmi

Related Posts